Aluminum Can Balers
In an effort to preserve the environment and cut back on the amount of waste dumped in landfills, baler manufacturers have developed equipment to reduce the volume of aluminum cans to prepare them for reprocessing. Aluminum can balers are a main asset in speeding up processing and assisting aluminum manufacturers in streamlining their production.
Quick links to Aluminum Can Balers Information
Characteristics of Aluminum Can Balers
An aluminum can baler is designed to assist in the recycling and packing of aluminum cans. The three components of a baler are a hydraulic ram that compresses the cans, a control system, and various methods for feeding. Aluminum balers operate using hydraulic cylinders on the sides of the baler that press forward at different time rates to compress the contents inside.
Once the bale is formed and completed, it is unloaded by one of three methods depending on the type of baler. The most common form of bale out method is side turning, where the bale turns out of the press box at 90 degrees, creating a bale with clear corner angles. The other bale out types are forward and side pushing.
Benefits of Using Aluminum Can Balers
The main benefit of an aluminum can baler is its cost effectiveness. Aluminum balers provide companies with the ability to repurpose aluminum and put the recycled material toward the production of new products. Also, by using an aluminum can baler, companies are provided with a compact and easy to store source of raw materials for remanufacturing. Overall, the convenience and efficiency of the baling process makes transport and processing easier and economical.
Notable Types of Balers
Aluminum can balers come in a variety of types and designs. The engineering of a baler depends greatly on the amount of baling that is required, how it will load, and the number of bales it can produce.
Small collection operations that produce individual bales normally use a vertical baler that is loaded from the top. The process uses the same hydraulic compression to produce easy to transport individual bales. Large operations that compress and eject multiple bales use a horizontal baler design. The aluminum cans are loaded in one side of the baler, compressed, and ejected out the other side. The process is similar to methods used on production assembly lines.
More elaborate methods and highly efficient recycling operations use the closed-door type of balers. Closed door balers have aluminum cans constantly fed through a conveying system. This type of baler is capable of baling any form of recyclable materials.